Find Electric Cartridge Heater, Wax Cartridge Heater, High Density Heater on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > cartridge heater > heater rod bundle electric heating element

heater rod bundle electric heating element

Basic Info

Model No.: SZ-0001-R

Product Description

  heater rod bundle electric heating element cartridge heater Applications: Water Heating
We recommend 10 watts per square centimetre when cartridges are to be immersed in water because the water removes the energy from the element very effectively. Commonly used as a chemical solutions heater. Oil Heating
Commonly used as engine sump heaters. When heating some oils, only 2 watts per square centimetre can be used otherwise the high cartridge heater surface temperature causes the oil to oxidise and carbon to be built-up on the surface of the heater. When this occurs, the carbon can thermally insulate the cartridge heater, causing the unit to heat up internally, often resulting in electrical failure. Air Heating
Elements of approximately 1 watt per square centimetre are suitable for convection air heating, eg. Anti-condensation heaters. Die Heating
Manifolds, hot runners and torpedoes. Packaging
Hot melt glue applicators. Company introduction:  Jiangsu SHAZI heating equipment factory was founded in 1988S, as a professional producing heating elements corporation, we provide our best service and good products to our customers, such as industrial oven,flange heaters, circulation heaters, tubular heaters,and immersion heating elements,electricalresistance Alloy Wire.Our designers create designs that are of the highest quality, customized to meet your needs, and provide the highest return on investment for your budget. Contact us today to get started on creating a unique and attractive building front design.what is more, you'd better provide us with your drawingsso that we can design the products as your requirement.   Features:

Configurations/Options:

 

 

 

• Swaged in Leads 
• Crimped on Leads
 
• Post Terminals
 
• Right Angle Leads
 
• Teflon Seal
 
• Silicone Rubber Seal
 
• Epoxy Seal
 
• Swaged in Braid
 
• Right Angle Stainless Steel Braid
 
• Stainless Steel Flexible Conduit
 
• Copper Coupler and Stainless Steel   Flexible Conduit

• Right Angle Stainless Steel Conduit 
• Copper Elbow and Stainless Steel Flexible    Conduit
 
• Hex Head Pipe Fittings
 
• Double Ended Threaded NPT Fittings
 
• Flanges
 
• Locating Rings
 
• Thermocouples
 
• Bent Hot Rod
 
• SJO Cord
 
• Double Ended Heater

Design:  Cartridge Heater is designed to withstand ever demanding requirements. Our high-density compaction process ensures maximum reliability under adverse operating conditions. Its swaged construction provides the highest possible heat transfer rates and watts density. It is resistant to impact and vibration applications and we also have the option to make with a variety of seals to suit your requirements. Recommended for temperatures up to 750°C All Max K Cartridge Heaters are available with a built in Thermocouple Type J or K .  

Sheath Material

S/S 304  or as you want

Spirals

Nickel – Chrome

Insulation

Magnesium Oxide Powder

Voltage Supply

any voltage up to a maximum of 480V

Maximum Temperature

750 °C

Resistance Tolerance

+10% – 5%

Wattage Tolerance

+5% – 10% (closer tolerances are available upon special request)

Terminations

as you want

 

Heat intensity

Not exceeding 30w/cm2 (advisable)

Power

Depends on the dimension

Exhaust extreme (when cold)

<=0.1mA to 242 v.

Insulation (when cold)

5 Min Ohms 500 Watts minimum

Dielectric strength

1500v. 1/sec

Working temperature

750 Deg C max.

Length tolerance

+/-1.5%

Diameter tolerance

-0.02 to -0.06 mm

Cut off connection tolerance

+/-15 mm

Power tolerance (w)

+5 % - 10 %

Cold areas

Depends on length and diameter 5-25mm

  Construction:   1.     Steel, stainless steel, copper, or Incoloy sheathed elements.  2.     Element wire situated in proximity to outside surface for maximum heat transfer and minimum internal temperature while preserving good dielectric qualities  3.     Pure magnesium oxide compressed to an optimum density for best heat transfer and electrical insulation at elevated temperatures. 4.     Weld connection.  5.     Cold pin. 6.     Insulator.  7.     Standard post terminal.   Product showcase:   FAQ: When ordering Cartridge Heaters, please specify the following information . 1.Type of Cartridge Heater ( please refer to Termination Options ). 2.Ø of Cartridge Heater. 3.Overall length for a straight Cartridge Heaters. 4.Wattage & Voltage 5.Lead type ( glass fibre / PTFE ) & lead length.  Our service: Customized service One year warranty period Professional purchasing guide Technial support Brief introduction of cartridge heating element:  A cartridge heater is a tube-shaped, heavy-duty, industrial joule heating element (electrical resistance) used in the process heating industry, usually custom manufactured to a specific watt density, based on its intended application. Highly compacted they reach a surface watt density of up to 30 w/cm².  It may be used to heat any kind of substance or material, such as oil, air, or sugar. However, a common application is plastic pellets, which are melted in order to form molded plastic parts. An example of such a process is the "hot runner" process. Cartridge heaters resemble tubular heaters structurally but tend to have higher watt densities. Related SHAZI products you may interested in:   Payment and Shipment: Contact information:    Jiangsu Shazi Electric Equipment Co., Ltd.   Address: Rm. 13a01, Huabang International West Mansion, Shiji Rd., Tinghu Dist., Yancheng, Jiangsu, China (Mainland)   Tel: 0086-515-86661058    FAX: 0086-515-86661068   Whatsapp & Viber : +86-15050654657   Website on Alibaba: http://cnshazi.en.alibaba.com

Contact us if you need more details on Heater Rod Bundle Electric Heating Element/compoments. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Factory Supplied Heating Element、Heater Rod Bundle Electric Heating Element/compoments. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : cartridge heater

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters