High Quality Factory Direct Sales Fcp Cp50 Standard Heater
Basic Info
Model No.: HT-FCP001
Product Description
Model NO.: HT-FCP001 Certification: CE, ISO Brand: Hongtai Size: Customized Material: 8020 Nicr heating wire and Al2O3 Ceramic Beads Insulation: 5 Mohm Compression Strength: 2000 MPa Thermal Conductivity: 24 W/Mk Specification: CUSTOMIZED HS Code: 85168000 Type: Ceramic Heating Equipment Structure: Ceramic Heating Element Product: Cp50 Heater Max Temperature: 1050 Degree Celsius Resistance Voltage: 2000V/Min Radiating Temperature Inhomogeneity: More Than 5% Use Life: 3000hours Trademark: Hongtai Origin: Jiangsu China CP50 Heater
Ceramic heater pad
1. Simple introduction
A 95% aluminum oxide ceramic with 3/8 inch thickness
B The ceramic beads are sintered, special dielectric to bear high temperature 1100 degree celsius
C Nickel chrome resistance wire, multi-stranded weavng. It goes through the space which is formed by interlocking ceramic beads.
D Flexible for curve surface heating, such as pipes and containers.
E Cold tail.
Nominal 9 inches length of nickel chrome wire is welded with another nickel chrome wire. Then it forms cold tail to prevent dielectrical connector from being heated.
F Two kinds as usual.
80v 3.6kw thermal power with 120 square inches, 45 amps
60v 2.7kw thermal power with 90 square inches, 45 amps
If 80v heater is used as 60v heaters, the 3.6kw should become 2kw.
G Customized size is available.
2. Detailed introduction
Alumina Heating Pad is manufactured by weaving multi-stranded 80/20 Nichrome electric resistance heating wirethrough passages within interlocking ceramic beads. The beads are molded from sintered 95% Alumina ceramics, more that 3/8-inchthick. The Alu Wholesale High Temperature Alumina Flexible Ceramic Heater Pad mina has excellent high-temperature dielectric properties which combined with the interlocking bead design provideFCP heaters with exceptional electrical insulating qualities.
The interlocking bead design imposes rigidity along the heater length while allowing flexibility along the heater width, enabling it toconform to the curved surfaces of pipes and pressure vessels. A nominal nine-inch length of nickel wire is welded to each end of theNichrome wire to create a cold tail to prevent the electrically insulated camlock connectors from being heated.
Contact us if you need more details on Cp50 Heater. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Ceramic Heating Mat、Ceramic Heater. If these products fail to match your need, please contact us and we would like to provide relevant information.
Ceramic heater pad
1. Simple introduction
A 95% aluminum oxide ceramic with 3/8 inch thickness
B The ceramic beads are sintered, special dielectric to bear high temperature 1100 degree celsius
C Nickel chrome resistance wire, multi-stranded weavng. It goes through the space which is formed by interlocking ceramic beads.
D Flexible for curve surface heating, such as pipes and containers.
E Cold tail.
Nominal 9 inches length of nickel chrome wire is welded with another nickel chrome wire. Then it forms cold tail to prevent dielectrical connector from being heated.
F Two kinds as usual.
80v 3.6kw thermal power with 120 square inches, 45 amps
60v 2.7kw thermal power with 90 square inches, 45 amps
If 80v heater is used as 60v heaters, the 3.6kw should become 2kw.
G Customized size is available.
2. Detailed introduction
Alumina Heating Pad is manufactured by weaving multi-stranded 80/20 Nichrome electric resistance heating wirethrough passages within interlocking ceramic beads. The beads are molded from sintered 95% Alumina ceramics, more that 3/8-inchthick. The Alu Wholesale High Temperature Alumina Flexible Ceramic Heater Pad mina has excellent high-temperature dielectric properties which combined with the interlocking bead design provideFCP heaters with exceptional electrical insulating qualities.
The interlocking bead design imposes rigidity along the heater length while allowing flexibility along the heater width, enabling it toconform to the curved surfaces of pipes and pressure vessels. A nominal nine-inch length of nickel wire is welded to each end of theNichrome wire to create a cold tail to prevent the electrically insulated camlock connectors from being heated.
Voltage (V) | 80/60 |
Current (A) | 45 |
Power (kw) | 3.6/2.7 |
Maximum Use Temperature*, °C (°F) | 1050 degree celsius |
heating element Type | Ni-Cr |
Lead Length (in.) | ~24 |
Insulator Type | Aluminum Oxide |
Insulator Color | Pink & White |
Product Categories : Ceramic Pad Heater
Premium Related Products
Other Products
Hot Products
Electric Water Heating Element for Sauna Heater, Water HeaterHeavy-Duty oven Convection Heater and tubular heating pipeAluminum extrusion moulding heating element for room heaterU type portable installation spiral heater and heating elementElectric heating element with thermostatdishwasher water immersion electric heating elementone year warranty bronze die casting heater0.18mm stainless steel wirequickly heating element for coffee cup warmerair heating systems electric finned tubular duct heaterlow power heating elementHigh Quality Industrial heater Water heater Instantaneous Heating Elementsair industrial electric tubular heaters2016 newest type customized air industrial electric cartridge heaters2016 newest type customized electric flexible heating element2016 newest type customized electric ptc heater element